10' Ft. High Performance 1/4” Male TS to Dual RCA Male Unbalanced Audio Cable

Featuring the ProX XC-DPR10 10 ft. 1/4" Male TS to Dual RCA Male Unbalanced Y-Cable, the long-run solution for professionals who need a clean signal split with real distance between source and destination. Ten feet opens up possibilities that shorter cables simply cannot cover. Run audio from a rack-mounted amplifier across the stage to a powered speaker, bridge a mixer output to a house system input, or give yourself the routing flexibility to keep your setup clean and organized without forcing equipment into tight proximity. When the gig demands reach, the ProX XC-DPR10 delivers it without ever cutting corners on signal integrity. Construction and Signal Path At the core of this cable are 20 AWG x 2 oxygen-free copper (OFC) conductors wrapped in a 93% braided OFC shield. That shielding level is critical on longer cable runs where the risk of interference, hum, and RF noise pickup increases with distance. The 93% braid coverage keeps your signal clean and isolated from start to finish, whether you are running 2 ft. or 10. The connectors are dual-plated with both gold and silver, delivering a low-resistance, corrosion-resistant contact surface at the 1/4" TS male plug and both RCA male plugs. You get a solid, full-fidelity connection every time you seat the connectors. Chassis and Jacket The connector housings are built from tough metal and plastic construction with reinforced boots at the stress points where connector meets cable. These are exactly the points where longer, heavier cables put the most strain, and the ProX XC-DPR10 is built to take it. The outer jacket is a flexible PVC that stays pliable even when coiled for storage or transport, resisting the cracking and stiffening that degrades lesser cables over time. Configuration and Application This is a Y-splitter configuration with a single 1/4" TS male plug splitting to two RCA male plugs on the other end. The signal runs unbalanced, which is the correct specification for RCA connections between devices sharing a common ground reference. At 10 ft., this cable is the right choice for stage-to-speaker runs, cross-room patching, and any application where you need audio routing flexibility without sacrificing signal quality over distance. Tested Before It Ships Every ProX cable is individually tested before shipment. That means when the ProX XC-DPR10 arrives at your door, it has already been confirmed to perform. You are not discovering problems at load-in. You are ready to work. Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence. ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DPR10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear. Y-Cable Configuration: Single 1/4" TS male input splits to dual RCA male outputs for mono source to stereo destination patching 20 AWG x 2 OFC Conductors: Oxygen-free copper conductors for a clean, low-noise signal path across longer runs 93% Braided OFC Shield: High-coverage shielding blocks interference and RF noise pickup critical on 10 ft. runs Gold and Silver Plated Contacts: Dual plating for superior signal transfer and long-term corrosion resistance Tough Metal and Plastic Connector Housings: Reinforced at stress points to handle the added strain of longer, heavier cable runs Flexible PVC Outer Jacket: Stays pliable under varying temperatures; resists cracking and stiffening over time Unbalanced Signal Type: Standard RCA wiring for applications where source and destination share a common ground 10 ft. Cable…