1000 Ft. Balanced High Performance XLR MIC Bulk 3-Conductor Audio Spool Cable

Introducing the ProX XC-MIC1000FT 1000 Ft , Balanced High Performance XLR MIC Bulk 3-Conductor Audio Spool Cable, the go-to choice for audio professionals who need serious cable on hand for large-scale installs, permanent venue wiring, touring builds, and high-volume production work. When a 300-foot spool is not enough, ProX XC-MIC1000FT delivers a full thousand feet of balanced, high performance microphone cable in a single spool so you can cut exactly what you need, terminate to spec, and wire any job without running short. This is the spool that production companies, integrators, and touring crews keep on the truck. Built for Balanced Signal the ProX XC-MIC1000FT is designed as a balanced 3-conductor audio cable, giving you the noise rejection and signal integrity required for long runs in live sound environments, installed sound systems, and touring applications where cable passes near power lines, dimmers, and other sources of interference. Clean signal from one end of the run to the other is not a bonus with this cable, it is the baseline. Oxygen-Free Copper Conductors and Braided Shielding form the core of the XC-MIC1000FT. OFC conductors resist signal degradation and deliver optimum signal transfer across the full length of any run you cut from this spool. The 93% braided OFC shield wraps the conductors in dense coverage that locks out RF interference and external noise, keeping your audio path clean regardless of what the environment throws at it. Flexible PVC Jacket gives the cable the workability needed for professional termination and installation work. Whether you are pulling cable through conduit, running it under a stage floor, or building a custom snake bundle, the jacket flexes cleanly without kinking and holds up through the handling that comes with high-volume cable work. The Spool Format is the real value of the ProX XC-MIC1000FT for production professionals. Instead of buying pre-made lengths that almost fit, you control the finished product entirely. Cut to the exact length the job requires, terminate with your connector of choice, and eliminate unnecessary cable runs from your rig. At 1,000 feet per spool, this is enough cable to wire a full venue, stock a production shop, or outfit an entire touring system from a single order. ProX Limited Warranty backs the XC-MIC1000FT, so the cable you build from this spool is covered for the long run. Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence. ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-MIC1000FT is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear. 1000 Ft. Bulk Spool Format provides enough professional-grade balanced mic cable to wire a full venue, stock a production shop, or outfit an entire touring system from a single spool Balanced 3-Conductor Design delivers the noise rejection and signal integrity required for long runs in demanding live sound, installed sound, and touring environments 93% Braided Oxygen-Free Copper (OFC) Shield blocks RF interference and external noise across the full length of any run, keeping your audio path clean regardless of environmental conditions OFC Conductors provide optimum signal transfer with minimal resistance and maximum clarity from source to destination Flexible PVC Jacket allows clean workability through conduit pulls, under-stage runs, and custom snake builds without kinking or cracking under professional handling Cut-to-Length Control eliminates the waste and compromise of pre-made lengths,…