10ft Stage Lighting / Speaker Center Load Crank Stand Holds 180 Lbs

Featuring the ProX XT-LS01C 10 Ft. Stage Lighting and Speaker Center Load Crank Stand , a reliable lifting solution built for working professionals who need to get lights and speakers up fast, at the right height, every single show. Whether you are running a club night, a live band gig, or a corporate event, getting your fixtures elevated to a proper height makes a real difference in how your production looks and sounds. ProX XT-LS01C is built to handle that job with a 180 lb. center load capacity , giving you the headroom to run a full T-bar setup loaded with fixtures without second-guessing your gear. Center Load Design The XT-LS01C uses a center load crank configuration, which keeps weight balanced directly over the stand rather than shifting stress to one side. This matters when you are working with heavier fixtures or a fully loaded T-bar, because balanced load distribution means a more stable lift and a safer setup overall. Crank Lift Mechanism The built-in crank winch lets you raise and lower your T-bar setup smoothly and with control. Turning the handle clockwise lifts the mast, and counter-clockwise brings it back down. The gear-driven system gives you steady movement rather than a free-drop, so you stay in control at every stage of setup and teardown. Maximum Height and Pole Compatibility The stand extends to a maximum height of 10 ft. , giving you genuine elevation for stage lighting and speaker systems in a wide range of venue sizes. The mast uses a 35mm (1 3/8") standard pole fitting , which is the industry standard diameter and is compatible with ProX T-bars including the XT-5FT-TRBR and XT-LSTBAR-5FT (each sold separately). T-adapters and truss sections for overhead rigging configurations are also sold separately. Safety and Setup Considerations Before each use, position the stand on a hard, stable surface on firm ground, and fully stabilize the legs before raising any load. When working outdoors, the stand should be secured with braces or cables to account for wind. All safety mechanisms including safety pins and knobs should be locked before and during use. Loads must be centered and balanced, and safety chains are required on every item attached to the stand. During transport, all sections should be closed and the lifting carriage locked. Do not attempt to move the stand while it is loaded or in the extended position. Inspection and Maintenance A competent person should inspect all rigging hardware, stands, and equipment before each use. The cable, pulleys, and telescopic mast sections should be checked before every lift, and any damaged cable should be replaced immediately. Annual inspection by an authorized technician is recommended. Servicing and repairs should only be performed by qualified persons. Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence. ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XT-LS01C is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear. 180 lb. maximum vertical center load capacity for confident use with fully loaded T-bar and fixture setups Center load crank design keeps weight balanced directly over the stand for a stable and secure lift 10 ft. maximum height provides genuine elevation for stage lighting and speaker systems across a wide range of venues Gear-driven crank winch raises and lowers the mast smoothly and with full control at every stage of setup and teardown 35mm (1 3/8") standard pole fitting is industry-compatible and works with ProX XT-5FT-TRBR and…