2 Inch 180FT 60YD Fluorescent Yellow Commercial Grade Gaffer Tape Pros Choice Non-Residue

Introducing the ProX XGF-260FLY 2 Inch Commercial Grade Gaffer Tape, the no-compromise solution for production professionals who need a tape that actually performs under real show conditions. Whether you are pinning down cable runs across a dark stage, marking positions on a set, flagging pathways for crew, or securing props and fixtures before the house lights drop, ProX XGF-260FLY is built to hold without hesitation and release without a mess. Its bold fluorescent yellow color is purpose-made for high-visibility applications where a standard tape simply will not cut it, making it an essential tool for stage managers, riggers, lighting directors, DJs, and broadcast crews alike. Each roll delivers 180 feet (60 yards) of professional-grade coverage at a full 2 inches wide, so one roll goes a long way on any production. Construction and Material ProX XGF-260FLY is built on a natural rubber base adhesive that is completely solvent-free. The cloth backing gives it a non-reflective matte surface that does not catch stage light or camera lens, making it invisible to audiences and lenses even under direct illumination. The woven fabric construction allows for clean, straight hand tears with no knife or scissors needed, which is critical in fast-moving production environments where every second counts backstage. Grip and Residue-Free Performance The adhesive on ProX XGF-260FLY is pressure-sensitive and heat-activated, delivering a firm hold once properly applied to a clean, dry surface. At 35.8 lb/in tensile strength and 11.8 mil thickness, it grips firmly enough to stay put through a full show but releases cleanly afterward, leaving no sticky residue on floors, cables, cases, or gear. This is the core reason professionals in film, television, theater, and live events choose gaffer tape over alternatives: it works hard and disappears without consequences. Water-Resistant Performance ProX XGF-260FLY carries water-resistant properties on its surface, making it usable in outdoor or humid environments where moisture is a factor. It can hold up in conditions where standard tapes would fail or peel. Note that while the tape surface is moisture-resistant, the adhesive is pressure and heat-activated, so best results come from applying it to the driest and cleanest surface possible. Fluorescent Yellow Visibility The fluorescent yellow finish on ProX XGF-260FLY makes it a go-to choice for position marking, safety pathways, cable hazard identification, and any application where fast visual recognition matters. It is the kind of tool that keeps crews moving safely in low-light environments and helps productions run efficiently from load-in to strike. Application Notes For best results, surfaces should be clean, dry, and free of grease, oil, and dust before application. Press firmly when applying and allow warmth to activate the adhesive fully. Store unused rolls in the original packaging in a cool, dry area away from direct sunlight, and use within 12 months of shipment date for optimal adhesive performance. Specifications at a Glance Finish: Fluorescent Yellow. Width: 2 inches. Length: 180 ft (60 yd). Thickness: 11.8 mil. Tensile Strength: 35.8 lb/in. Material: Natural Rubber Base, Solvent-Free. Temperature Range: 50° to 180°F. Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence. ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XGF-260FLY is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear. Professional 2" Wide Gaffer Tape built…