Lowering Set for HOF 10FT MLT THREE Pre-Rig Truss

Featuring the ProX XTH-MLTLS10FT Lowering Set for the HOF 10FT MLT THREE Pre-Rig Truss, this is the purpose-built accessory that gives lighting technicians and production crews the positional control they need when mounting fixtures inside an MLT pre-rig truss system. When you're working fast under show conditions and every inch of positioning matters, ProX MLTLS10FT delivers the adjustability and load capacity to get the job done right, every time. Purpose and Function The ProX MLTLS10FT lowering set is engineered to attach smaller lighting devices deeper into the MLT truss structure, positioning them below the central tube without interference from the lower chord tubes. This is a practical solution for professionals who need precise vertical placement of fixtures within the truss bay, particularly when fixture size or beam angle requires a lower mounting position inside the system. 4-Position Height Adjustment The lowering set offers four distinct adjustable height positions, giving riggers the flexibility to match the mount depth to the specific size of the lamp or fixture being installed. Height is set during installation using the included hardware, and all connections between the truss and the lowering set must be engaged for proper use. Load Capacity This lowering set is rated for a maximum distributed load of 210 kg , with a maximum single point load of 70 kg at the third points. These are confirmed HOF specifications. All devices mounted on the lowering set must be independently secured with safety cables as required by applicable regulations. Fastening and Safety Hardware The lowering set is fixed below the central tube of the MLT crossbar in Step 1, with height adjusted in Step 2. Rip Lock nuts on the mounting screws are tightened to 50 kN, with a maximum of 70 kN. When hexagon nuts are used for all connections, no additional safety is required. When wing nuts are the only fastening method used, safety cables are required to additionally secure the lowering set. All nuts and bolts must be confirmed tight before use, and the unit must not be used if any damage is present. Compatibility Designed specifically for use with 10FT MLT pre-rig trusses by HOF, including the MLT TWO, MLT THREE, and MLT FOUR configurations. This listing is for the ProX MLTLS10FT, which is paired with the MLT THREE. Always verify compatibility with your specific truss configuration before ordering. Note: Only the lowering set is included. The pre-rig truss and any lighting fixtures shown are not included. Engineered by HOF Germany. Distributed in North America by ProX Live Performance Gear. Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence. ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX MLTLS10FT is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear. ProX is a certifier distributor of HOF Engineered by HOF Germany. Distributed in North America by ProX Live Performance Gear. Compatible with HOF 10FT MLT TWO, THREE, and FOUR Pre-Rig Truss systems Positions fixtures below the central tube without interference from lower chord tubes 4 adjustable height positions to accommodate different fixture sizes Maximum distributed load capacity: 210 kg Maximum single point load: 70 kg at third points Rip Lock nut fastening system tightened to 50 kN (max. 70 kN) Hexagon nut connections do not require additional safety cables Wing nut only connections must be additionally secured with safety cables All devices mounted on the lowering set must…